3M double sided tape storage requirements

When 3M double-sided adhesive bonding, adjustment shall be the following manner, obtain enhanced bonding effect:

1, the first surface of the adhesive must be cleaned and dried with a cloth dampened with a general recommendation 1: 1IPA (isopropyl alcohol) mixture of water and wipe clean the surface until the surface is completely dry.

2, after the solvent is dried to be cleaned, the adhesive tape bonded to the surface of the drum or otherwise subjected to about 15PSI (1.05 kg / cm) of the pressure of the adhesive to be effective.

3, peel off the tape release paper, and then will be required to fit pasted materials, also impose 15PSI pressure to effectively fit. For removal of air bubbles, the pressure should be increased to a maximum of items can withstand the limit.

4, when the desired temperature is pasted 15-38 ℃, do not lower than 10 ℃.

5, adhesive tape, should be bonded to the first end, and then to the other end of the pressure relief to reduce the probability of bubble generation. 3M double-sided adhesive suitable environment requires storage: temperature of 19-23 ℃, humidity of 40-60%